Type
:
Detail brush set, 3 pieces
Applications
:
Wheel spokes, lug nut recesses, air vents, panel gaps, appliance seams
Bristle material
:
Sharpened (tapered) synthetic filament
Handle
:
PP + TPR, dual-material grip
Sizes
:
10#, 12#, 16#
Set weight
:
110 g
Packaging
:
OPP bag or customized
MOQ
:
100 sets
A blunt-cut brush cleans the surface it touches. A sharpened filament brush cleans the corner. Each filament in this set is drawn to a tapered point, so the tip bends into seams, spoke gaps, and vent slots that a flat-cut brush rides over. Three sizes, 21.5 cm PP + TPR handles, black filament on red and black.
Blunt filament presents a flat wall of bristle to the dirt. It pushes debris along the surface instead of digging it out.
Sharpened filament ends in a point:
Brake dust packed into a spoke recess and polish residue dried in a badge edge are the two jobs this geometry was built for.
Natural hair softens as it absorbs water and swells. Synthetic filament does not take on water, so the brush works the same dry or soaked in wheel cleaner.
For wheel work — the wettest, dirtiest part of detailing — that consistency is the point.
The 10# handles the smallest gaps, the 12# the vent slots and panel joints, the 16# the spoke faces and wider recesses. Same head material in all three, so the set behaves predictably from the first brush to the last.
Rigid PP core, TPR overmold on both sides. The neck — the joint where the bristle cup meets the handle — is the weak point on a detail brush and it is reinforced here, because that is where the side load lands when you work a spoke gap.
Hanging hole in every handle: dry the set hanging, not lying in a tray.
| Specification | Detail |
|---|---|
| Type | 3-piece detail brush set |
| Set contents | 10#, 12#, 16# |
| Bristle material | Sharpened (tapered) synthetic filament, black |
| Bristle length | 4.5 cm / 1.77 inches |
| Total length | 21.5 cm / 8.46 inches |
| Handle | PP + TPR, dual-material, non-slip |
| Metal parts | None |
| Set weight | 110 g |
| Color | Red and black (custom available) |
| Packaging | OPP bag or customized |
| Applications | Wheel spokes, vents, panel gaps, emblems, appliance seams |
| MOQ | 100 sets |
Rinse after use and work the tips against your palm to clear brake dust from the base of the bristles — this is where grit hides and where a brush starts to splay.
Synthetic filament dries fast. Shake out the water and hang the brush by its hole. There is no need to reshape the head by hand; the taper recovers on its own.
What is sharpened filament?
Synthetic filament drawn to a tapered point instead of cut flat. The point reaches into gaps a blunt brush slides over, and the taper keeps the tip flexible while the body stays stiff.
What is the set used for?
Wheel spokes, lug nut recesses, brake caliper edges, air vents, panel gaps, emblems, and appliance seams — anywhere dirt sits at the bottom of a narrow gap.
Will it scratch wheels or paint?
The set has no metal parts, and the tapered tips flex under load. Use it with wheel cleaner and light pressure; the tip does the work, not the force.
Is it better than boar hair for wheels?
For wet wheel work, yes. Synthetic filament does not absorb water or soften in wheel cleaner, so it stays firm through a full set of four wheels. Boar hair is the better choice for dry interior dusting.
Can it be used on interior trim?
Yes, on hard trim, vents, and panel joints. For gloss black or wrapped leather, use the soft PP set instead.
What sizes are in the set?
10#, 12#, and 16# — small for caliper edges and badge gaps, medium for vents and panel joints, large for spoke faces.
Can I customize color and packaging?
Yes. Handle color, filament color, logo, and packaging are all customizable, with samples before production.
What is the MOQ?
100 sets, standard packing in an OPP bag.
Tell us your target market, filament color, and packaging preference. We supply wholesale 3 pcs sharpened filament detail brush sets with custom branding — email marketing@zhendabrush.com or use the inquiry form.
Anhui Zhenda Brush Industry Co., Ltd. focus on brush manufacturing since 2002. We'd love to learn your business, requirements & expectations.
marketing@zhendabrush.com
+86 17355617116
NO.1 Shuanglin East Road. Yuantan Economic Development Zone, Qianshan County, Anhui Province, China. Zone, Qianshan County, Anhui Province, China.
Founded in 2002, Anhui Zhenda Brush Industry Co., Ltd. focus on brush manufacturing.
Factory Location: NO. 1 Shuanglin East Road, Yuantan Economic Development Zone, Qianshan County, Anhui, China
We are committed to protecting your privacy; your information will only be used for quotation purposes. By submitting this form you agree to our Privacy Policy.